New Teknamotor Skorpion 250 RG/90 wood chipper
Ostrowiec Świętokrzyski
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 41 263 ...
Show
+48 41 263 68 23
+48 41 263 ...
Show
+48 41 263 69 13
Poland 
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Ostrowiec Świętokrzyski
Poland, Sokołów Podlaski
Poland, Opalenica
Poland, Mogilno
Poland, Podegrodzie
Poland, Słupia
Poland, Słupia
It’s a mobile disc model with pneumatic blow-out system installed on the disc. Chips are ejected through a rotary chimney which can turn by 360° in relation to the chassis. The machine to collaborate with over 100 hp farm tractor.
The cutting system of this chipper consists of a disc with cutting knives suitable for sharpening on either side. The drive is transmitted from PTO shaft of a tractor with the speed of 540 or 1000 revolutions per minute.
The essential equipment of the chipper includes a hydraulic propulsion system servicing the upper feeding roll and a crawler installed instead of normally used lower roll. Such solution allows for easier loading of wood, improves operator’s work and enhances efficiency. Both of them are driven by hydraulic motors. All above mentioned devices are driven by its own hydraulic pump.
The construction of the chipper is set on a single axial chassis that enables the device to be towed behind a tractor on forest and field roads. Innovative solution of the lateral position of the feeding table enables simultaneous transport of chipper and trailer with a tractor.
Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.
As a standard, the chipper is also additionally equipped with one of the most advanced electronic system of work control available on European market automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.
Easily editable software of the No-stress system provides a simple way to change the settings of the machine adapting it to individual needs. Preset "thick wood" and "thin wood" modes allow fast and easy change of the operation of the chipper in order to match the current material to be shred and increase the effectiveness of work. Total- and daily- hour meter is built into this system.
Overall dimensions (LxWxH) 3000 x 2350 (3150)* x 2600 (3620) * [mm]
Weight 1900 without hydraulic crane [kg]
Branch diameter 250 [mm]
No of knives 2 or 3 cutting + 2 counter-knife
Feeding speed up to 42 [running meters/min]
Chipping capacity up to 18 [stère meters/h]
Chip width from 9 to 14 [mm]
Method of feeding mechanically by crane or manually
Disk diameter 800 [mm]
Hopper dimensions (WxH) 420 x 255 [mm]
Min. power of tractor 100 [hp]
()* - during operation
Standard equipment
- Axial chassis up to 25 km/h
- PTO
- Swivelled by360° ejection tube with deflector
- Own hydraulic system
- Electronic system of work control with hour meter
Optional equipment
- Hydraulic crane
show contacts