Pöttinger HIT 8.91 tedder
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 172 43...
Show
+49 172 4377651
+49 39291 4...
Show
+49 39291 469711
+49 39291 4...
Show
+49 39291 469720
Germany 
Germany, Nartum
10.6 m
Germany, Steinheim / Bergheim
12.5 m
Germany, Bockel - Gyhum
6 m
Germany, Hamburg
8 m
Germany, De-75031 Eppingen
8 m
Germany, Hamburg
7 m
Germany, Hamburg
8 m
Germany, De-64401 Gross-Bieberau
6 m
Germany, Hamburg
8 m
Germany, Pragsdorf
7.9 m
Germany, Friedberg-Derching
8 m
Germany, De-48341 Altenberge
4 m
Germany, Hamburg
8 m
Germany, Hamburg
8.6 m
Germany, Hess. Oldendorf
8.4 m
Germany, Emsbüren
7 m
Germany, Hamburg
6 m
Germany, Hamburg
7 m
Germany, Hamburg
7 m
Germany, De-48341 Altenberge
HIT 8.91
Pöttinger tedder
PTO shaft with freewheel 1 3/8"
6-piece
Three-point linkage Cat. II
Standard tine 9.5 mm
Drive 540 rpm
Warning signs with lighting
PÖTTINGER equipment
Working width 8.86m
Transport width 3m
Transport height 3.65
Weight 1250 kg
Number of rotors 8
Number of arms per rotor 6
Power requirement 75PS
Tine loss protection
Damping struts
Perfect ground hugging due to
double-cut frame hinges
The center of gravity is close to the
short three-point headstock close to the tractor
tractor
The pivoting headstock heart pin
centers the machine in the middle position
in the center position
The vertical pivot point reliably prevents
reliably prevents underrunning when
downhill travel and guarantees a large
lift height at the headland
Two damping struts ensure optimum
centering
which ensures that the machine
smooth tracking of the machine is ensured
is ensured
Clean spreading pattern due to curved tine arms
tine arms
Cleaner forage intake due to small
rotor diameter
Cleaner forage due to optimum
ground adaptation of the individual rotors
Rotor tilt can be adjusted without tools
fivefold
Optimum working quality under all
operating conditions
Clean feed intake and best spreading
spreading quality due to unevenly long
tine legs
The rotor disks are made from
stable
thick-walled molded parts
with precise support for the tines
The tine arms are additionally
bolted to the inside of the rotor hub
which
a high-strength connection is achieved
The solid tine arms are made from
flat steel with press-fit joints This ensures
secure and firm fit of the tines
The HEAVY-DUTY tines stand for
particularly long service life
The double tines are made from the best
spring steel in Super C quality
manufactured
The curved bracket supports the tine
the tines in their function and makes them
and makes them more resistant
The integrated tine loss protection
is standard This also improves
additionally improves the support of the
tine windings
Force-locking
smooth-running and
backlash-free drive due to
permanently lubricated single and
double joints -Large gear wheels and bearings
bearings ensure a smooth-running drive
drive
The closed angular gearboxes are equipped
equipped with grease lubrication
No oil loss possible
The joints are mounted on a toothed shaft
shaft